Rust Veto 76-HF

Rust Veto 76-HF employs a new additive system for the protection of a wide variety of metals and alloys.  The product will completely displace moisture on metal surfaces.  It dries readily to a very thin, but tenacious film which is safe to handle and provides excellent long-lasting protection.  Rust Veto 76-HF demonstrates unusual protection in humidity testing.  The transparent film affords good product visibility.

 

FEATURES

 

·         Unusually good humidity protection

·         Suppresses fingerprints

·         Displaces water

·         Completely compatible with ferrous and nonferrous metals

·         Non-staining

·         Excellent coating for cast iron parts

 

TYPE AND LENGTH OF PROTECTION

 

Long-term indoor protection.  For extended shed storage with or without barrier wrapping.  Overseas protection with overwrap.

 

TYPICAL PHYSICAL PROPERTIES

 

Appearance	Opaque, brown liquid
Type of Film	Tan, clear, soft, greasy
Film Thickness	0.3 mil
Drying Time	4 hours
Non volatile Content, %	30-33
Viscosity @ 100°F, SUS	55 (8.89 cSt @ 37.8°C)
Pounds per Gallon @ 60°F	7.1
Flash Point, PMCC	195°F minimum (87.8°C)
Coverage	1300 sq. Ft./gal.

 

METHOD OF APPLICATION

 

Dip, brush or spray

 

FILM REMOVAL

 

Use 6 to 8 ounces per gallon of Cerfa-Kleen HST at 180-190°F for five minutes or remove with stoddard solvent, mineral spirits or kerosene.

 

PROTECTION DATA

 

Fingerprint Suppression MIL-C-25074C	Passes
5% Salt Spray Polished Panels	1 day
Humidity @ 120°F, Polished Panels	90 days minimum over 120 days, typical
Humidity @ 100°F, Cast Iron Panels	16-18 days
Water Displacement, MIL-C-16173D, Grade 3	Passes

 

SHIPPING INFORMATION

 

Rust Veto 76-HF is available in 55 U.S. gallon (208 liter) drums and in bulk.

 

SHIPPING CLASSIFICATION

 

Combustible Liquid - NOS

Petroleum Lubricating Oil - NOS

 

STORAGE/HANDLING/DISPOSABILITY

 

No health or safety hazards exist when Rust Veto 76-HF is stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

 

WARRANTY

 

The information given here is considered to be correct and is offered for your consideration, investigation and verification.  No warranties are expressed or implied, since the use of our products is beyond our control.  Statements concerning the use of Houghton products are not to be construed as recommending the infringement of any patent.

 

EXPORT STATEMENT

 

This commodity and its technology are subject to the export control laws and regulations of the United States Government.  Buyer agrees that it shall not make any disposition, by way of export, diversion, transshipment, re-export or otherwise, except as expressly permitted under United States law.