Rust Veto 4214-W

WATER DISPLACING WITH RAPID SEPARATION DISPLACES ANY FREE WATER EXTREMELY FAST; RESIST ALKALINE, ACID, SOLVENT EMULSION CLEANER CARRY-OVER

 

Rust Veto 4214-W is a rust preventive that is exceptionally stable in wet conditions, particularly where there is alkaline, acid or solvent emulsion rinse water left on parts.  It offers prolonged effectiveness where rinsing is not always thorough.  Rust Veto 4214-W releases displaced water within minutes and, on evaporation, leaves a very thin, transparent protective film.  It provides indoor protection for as long as 12 months, particularly if parts are packaged.

 

FEATURES

 

·         Easy to apply - displaces and separates water fast

·         Exceptional stability - even in acid or alkaline conditions

·         Flash Point - 155°F Typical

·         Excellent humidity protection

·         Easily removed

·         Barium-free

 

TYPICAL PHYSICAL PROPERTIES

 

Type of Film	Thin oily, transparent
Flash Point, typical, PMCC	155°F (68.33°C)
Recommended Uses	Fast displacement and complete separation of water after machining, cleaning, rinsing, wet tumbling.  Inter-plant protection of packaged items.
Film Thickness	.1 mil
Coverage	1900 ft.2/gal.
Application Method	Dip, spray or brush
Dry to Set Time	2 - 4 hours
Type of Protection	High humidity and finger- print suppression
% Non-Volatile	12%
Metal Compatibility	All metals

 

TYPICAL PROTECTIVE PROPERTIES

 

Protection Period:
Indoor	12 months
Outdoor	Not recommended
Water Displacement Method Specification MIL-C-16173D	Passes
Humidity @ 120°F Polished Panels	30 Days minimum
Water Separation	Passes

 

RECOMMENDED USES

 

Rust Veto 4214-W is particularly suited for application following electroplating and surface conversion processes, such as Houghto-Black.  For example, if parts are coated, quickly rinsed and then put into a rust preventive bath, the rinse water may contain acid or alkaline carry-over.  This carry-over will contaminate many rust preventives; Rust Veto resists contamination.  Thus, where complete rinsing is not feasible, Rust Veto is an ideal choice.

 

Rust Veto 4214-W is also excellent to use after wet tumbling.

 

HOW TO USE

 

Application

 

Apply Rust Veto 4214-W by spray, dip or brush between 70-95°F 21-35°C).  Consider the usual precautions for handling petroleum solvents in venting, prolonged breathing of vapors or skin contact.  The higher flash point of Rust Veto 4214-W offers a safety factor over most products, but ordinary protective measures against petroleum solvent fires should be taken.

 

Removal

 

Rust Veto 4214-W can be removed by washing with petroleum solvent or with Houghton's Cerfa-Kleen HST, Cerfa-Kleen HPW, or Cerfa-Kleen 5380.

 

TYPICAL PERFORMANCE

 

·         Square and round tubing, stacked between the forming and cut-off operations and assembly, rusted because the different shapes led to uneven drying of residual coolant and water.  Heavy film rust preventives gave the required protection for six months but required another cleaning operation before assembly.  A spray of Rust Veto applied before cut-off now displaces the coolant/water mix before the parts are stacked.  For further long-term protection, particularly in summer, an extra Rust Veto spray is applied just as the tubes are stacked and sent to storage.

 

·         Circulate sawblades require protection against corrosion during in-plant processing.  The manufacturer needed a thin film, high flash point product because the blades are sprayed as they move along a conveyor from the grinders.  Good drainage of the liquid on the blades was another requirement in order to reduce consumption.  If it were also a solvent, the rust preventive would give desired protection and help remove any remaining grinding swarf.  Among dozens of products from both specialty and major oil companies, only Rust Veto met all of the sawblade manufacturer's requirements.

 

·         Bearings coming from the grinder with coolant still on them receive a coating of Rust Veto for rust protection and to prevent water staining.  The Houghton product replaces a light oil rust preventive, which created messy working conditions.  The work station is now cleaner, and far less rust preventive is needed to protect the precision bearings.

 

SHIPPING

 

Rust Veto 4214-W is available in 55 (U.S.) gallon (208 liter) drums with a net weight of 365 pounds (168 kg).

 

STORAGE/HANDLING/DISPOSABILITY

 

No health or safety hazards exist when Rust Veto 4214-W is stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

 

WARRANTY

 

The information given here is considered to be correct and is offered for your consideration, investigation and verification.  No warranties are expressed or implied since the use of our products is beyond our control.  Statements concerning the use of Houghton products are not to be construed as recommending the infringement of any patent.

 

EXPORT STATEMENT

 

This commodity and its technology are subject to the export control laws and regulations of the United States Government.  Buyer agrees that it shall not make any disposition, by way of export, diversion, transshipment, re-export or otherwise, except as expressly permitted under United States law.