OAK 70-1

EVAPORATIVE LUBRICANT

 

DESCRIPTION

 

OAK 70-1 is an “evaporative” lubricant developed for fin stamping and collar drawing in air conditioning and heat transfer industries.

 

APPLICATION

 

OAK 70-1 is ideally suited for use on fin mills to form radiator fins, condenser fins, and plate fins inclusively. It can also be used to stamp, draw, and punch aluminum sheet stock where post cleaning is prohibitive.

 

The “evaporative” nature of this unique lubricant supplies high boundary lubrication, without leaving excessive residues.

 

FEATURES & BENEFITS

 

LUBRICITY:

 

Has been pre-tested on fin lines around the world, providing good die and tool life.

 

CLEANLINESS:

 

After using parts may not require post cleaning. Clean running product that does not contain oil. Pre-painted parts are dry to the touch.

 

CORROSION:

 

Non-staining to aluminum and copper alloys.

 

ECONOMICAL:

 

Contains no water to promote rancidity, thereby ensuring optimum shelf-life in lubricant reservoirs. Low end use cost.

 

RECOMMENDED STARTING DILUTIONS

 

OAK 70-1 is used as received (100%) and may be applied by spray, dip or brush methods. Add no other materials to the concentrate unless approved by your CIMCOOL representative.

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State	Liquid
Appearance and Odor	Pale Yellow/Chemical
Solubility in water	Insoluble
Weight, lb/gal, 60°F (15.6°C)	6.4
Specific Gravity	0.8
Viscosity SUS @ 100 F	32
Flash Point /Sp.Gr./Boiling Point	SEE MSDS
pH Concentrate	NA
pH, Typical Operating 100%	NA
Total Chlorine/Chlorides, wt%	0/0 ppm
Total Sulfur, wt%	0
Silicones	None

 

HANDLING AND STORAGE

 

If frozen, product separates, Thaw completely at room temperature and stir thoroughly prior to use. Inside storage is recommended.

 

SAFETY DATA SHEET

 

Available at www.cimcool.com

 

For additional information refer to its OSHA MSDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-513-458-8199.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.