MILPRO 830CF

GENERAL MACHINING

 

STRAIGHT OIL

 

DESCRIPTION

 

MILPRO 830CF is a general purpose oil recommended for machining and grinding operations.

 

APPLICATION

 

MILPRO 830CF can be used on ferrous and most non-ferrous metals. The MILPRO 830CF is recommended for turning, milling, threading and valve grinding.

 

LUBRICITY

 

MILPRO 830CF contains a carefully balanced lubrication package comprised of components with low depletion rates and high temperature stability.

 

RECOMMENDED STARTING DILUTIONS

 

MILPRO 830CF is to be used neat (100%). Add no other materials to the concentrate unless approved by your CIMCOOL® District Manager.

 

·         Machining and grinding use neat (100%)

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State	Liquid
Appearance and Odor	Clear/Chemical
Solubility in water	Insoluble
Weight, lb./gal, 60°F (15.6 °C)	7.3
Viscosity (SUS) @ 100°F	80
Flash Point /Sp.Gr./Boiling Point	SEE SDS
pH Concentrate	NA
pH Mix 5%, Typical Operating	NA
Total Chlorine, wt.%	0
Total Sulfur, wt.%	0

 

SAFETY DATA SHEET:

 

Available at www.cimcool.com

 

For additional information refer to its OSHA SDS on www.cimcool.com website, or contact your local CIMCOOL® Technical Service Specialist or you may contact CIMCOOL Technical Services at 1-888-CIMCOOL.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.