MILPRO 634HV

GENERAL MACHINING

 

STRAIGHT OIL

 

DESCRIPTION

 

MILPRO 634HV is general purpose oil recommended for machining and grinding operations

 

APPLICATION

 

MILPRO 634HV can be used on ferrous and most non-ferrous metals. It is recommended for moderate duty applications such as turning, milling, gun drilling and grinding.

 

PERFORMANCE

 

MILPRO 634HV is a higher viscosity version of MILPRO 634.

 

LUBRICITY

 

MILPRO 634HV contains a carefully balanced lubrication package comprised of both a physical lubrication component and an extreme pressure additive – contains stable lubricity additives with very low depletion rates and high temperature stability.

 

RECOMMENDED STARTING DILUTIONS

 

MILPRO 634HV is to be used neat (100%). Add no other materials to the concentrate unless approved by your CIMCOOL® District Manager.

 

·         Machining and grinding use neat (100%)

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State	Liquid
Appearance and Odor	Clear/Chemical
Solubility in water	100% miscible
Weight, lb./gal, 60°F (15.6 °C)	7.3
Viscosity (SUS) @ 100°F	175
Flash Point /Sp.Gr./Boiling Point	SEE SDS
pH Concentrate	NA
pH Mix 5%, Typical Operating	NA
Total Chlorine, wt.%	5.4
Total Sulfur, wt.%	0

 

SAFETY DATA SHEET:

 

Available at www.cimcool.com

 

For additional information refer to its OSHA SDS on www.cimcool.com website, or contact your local CIMCOOL® Technical Service Specialist or you may contact CIMCOOL Technical Services at 1-888-CIMCOOL.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.