×

MILFORM OAK DRAW 512

Ships in 5-7 Business Days

Unit Price: $125.75
Only %1 left
SKU
B30144

EVAPORATIVE LUBRICANT

 

DESCRIPTION

 

OAK DRAW 512 is an “evaporative” lubricant developed for electrical terminals, pre-painted metal stamping and related industries.

 

APPLICATION

 

OAK DRAW 512 is primarily used to stamp, bend and form where post cleaning is prohibited.

 

The “evaporative” nature of this unique lubricant supplies high boundary lubrication, while leaving minimal residue.

 

FEATURES & BENEFITS

 

LUBRICITY:

 

Has been pre-tested on high-speed presses, providing good die and tool life.

 

CLEANLINESS:

 

After use, parts may not require post cleaning. Clean running product that does not contain oil. Dry-to-touch on pre-painted alloys.

 

CORROSION:

 

Non-staining to aluminum and copper alloys.

 

ECONOMICAL:

 

Contains no water to promote rancidity, thereby ensuring optimum shelf-life in lubricant reservoirs. Low end use cost.

 

ASH LESS:

 

Uses ash less additives conforming to annealing processes.

 

RECOMMENDED STARTING DILUTIONS

 

OAK DRAW 512 is used as received (100%) and may be applied by spray, dip or brush methods. Add no other materials to the concentrate unless approved by your CIMCOOL representative.

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State

Liquid

Appearance and Odor

Clear/Chemical

Solubility in water

Insoluble

Weight, lb/gal, 60°F (15.6°C)

6.5

Specific Gravity

0.80

Viscosity SUS @ 100°F

33

Flash Point /Sp.Gr./Boiling Point

SEE MSDS

pH Concentrate

NA

pH, Typical Operating 100%

NA

Total Chlorine/Chlorides, wt%

0/0 ppm

Total Sulfur, wt%

0

Silicones

None

 

HANDLING AND STORAGE

 

If frozen, product separates, Thaw completely at room temperature and stir thoroughly prior to use. Inside storage is recommended.

 

SAFETY DATA SHEET

 

Available at www.cimcool.com

 

For additional information refer to its OSHA MSDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-513-458-8199.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.

More Information
ManufacturerCIMCOOL