INHIBITOR 42

METALWORKING FLUID ADDITIVE

 

INHIBITOR 42 is an additive used to increase ferrous corrosion control. INHIBITOR 42 can be added to any water-based metalworking fluid mix.

 

OPERATIONS:

 

In most cases proper concentration and routine makeup will provide the necessary long-term corrosion protection. However, as metalworking fluid systems age, especially in central systems, there may be a need to use and additive such as INHIBITOR 42 to boost corrosion protection. This can be used to counteract the buildup of corrosive ions such as chlorides and sulfates.

 

APPLICATION:

 

Follow the recommended dilution range (see below). Do not add excessive amounts of INHIBITOR 42 since it will reduce product mildness (increase fluid alkalinity) and may increase residue formation (tackiness). The CIMCOOL® Lab can monitor the quantity of INHIBITOR 42 in a metalworking fluid as needed.

 

RECOMMENDED STARTING DILUTIONS

 

FOR INDUSTRIAL USE ONLY

 

Recommended Starting Dilution	0.1% (1:1,000)
Typical Operating Range	0.1% (1:1,000) to 0.7% (1:150)

 

For concentrations outside this range contact CIMCOOL® Technical Service at 513-458-8199.

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical state	Liquid
Appearance and odor	Clear / Chemical
Solubility in water	100% Miscible
Weight, lb/gal, 60°F (15.6°C)	9.61
Specific gravity, (H2O = 1)	1.151
Boiling point, °F (°C)	210 (99)
Flash point, PMCC, °F (°C)	NA
Freezing point (or pour point), °F, (°C)	32 (0)

 

If frozen thaw completely at room temperature.

 

pH, concentrate

10.7

 

HANDLING and STORAGE

 

If frozen thaw completely at room temperature. Inside storage is recommended.

 

SAFETY DATA SHEET

 

Available at www.cimcool.com

 

For additional information refer to its OSHA MSDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-513-458-8199.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.