Hocut 795-NSC
Ships in 10-12 Business Days
HEAVY-DUTY MACHINING AND GRINDING FLUID FOR USE WITH ALL METALS INCLUDING AUTOMOTIVE GRADE CAST ALUMINUMS
Many of today's modern machine shops require the use of one coolant capable of working in many applications on a wide variety of metals. Hocut 795-NSC is such a product. Its versatility can be demonstrated by machines and metals on which it can be used. These include Kingsburys, Bullards, bar machines, lathes, chuckers, centerless and cylindrical grinders. Whether you're cutting high or low carbon steels, alloy steels such as 4130 and 4140; cast iron, nodular iron and gray iron; 300 and 400 series stainless steel, Hocut 795-NSC is the choice. It is especially suitable when machining automotive grade aluminum cast alloys including 308, 319, 356, 380, 384 and 390.
Hocut 795-NSC is formulated with a combination of ingredients that provide a greater resistance to microbial degradation of the fluid.
Field tests have shown that the synergies of the components in this product will reduce the frequency of sumpside additions of antimicrobial agents.
Hocut 795-NSC is compatible with hard water, is clean running and biostable, which assures long, odor-free sump life. It provides corrosion protection without staining and affords good lubrication for machine ways and indexing mechanisms. Low foaming characteristics make Hocut 795-NSC an excellent choice for gun drilling and other high pressure applications.
FEATURES |
BENEFITS |
Clean running/low foam |
Reduced disposal cost/less down time/operator acceptance |
Excellent corrosion protection |
In-process protection of machinery and parts |
Excellent machining capabilities |
Increased tool life; improves surface finish |
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
Appearance Neat |
Amber fluid |
5% Emulsion |
Whitish emulsion |
pH, 5% Emulsion |
9.1 – 9.3 |
Pounds per Gallon, 60°F |
7.9 |
RECOMMENDED USE CONCENTRATION
Machining |
10:1 to 20:1 |
Grinding |
20:1 to 25:1 |
CONCENTRATION CHECKS
The refractometer factor for Hocut 795-NSC is 1.1. Multiply the refractometer reading by this factor to obtain the emulsion concentration in percent.
SHELF LIFE
Under normal conditions, the recommended shelf life for Hocut 795-NSC is six (6) months.
SHIPPING INFORMATION
Hocut 795-NSC is shipped in 55 (U.S.) gallon (208 liter) steel drums and in bulk.
SHIPPING CLASSIFICATION
Metal Cutting and Drawing Compound
STORAGE/HANDLING/DISPOSABILITY
No health or safety hazards exist when Hocut 795-NSC is stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.
WARRANTY
The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of our products is beyond our control. Statements concerning the use of Houghton products are not to be construed as recommending the infringement of any patent.
EXPORT STATEMENT
This commodity and its technology are subject to the export control laws and regulations of the United States Government. Buyer agrees that it shall not make any disposition, by way of export, diversion, transshipment, re-export or otherwise, except as expressly permitted under United States law.
Manufacturer | Quaker-Houghton |
---|