CIMTECH 95

GENERAL INDUSTRY

 

DESCRIPTION

 

CIMTECH 95 is a synthetic metalworking fluid recommended for light duty grinding operations of ferrous metals, such as surface grinding, Blanchard grinding and double disc grinding.

 

APPLICATION

 

CIMTECH 95 can be used on cast iron, nodular iron, and carbon steels. It should not be used on magnesium alloys or non-ferrous materials.

 

FEATURES & BENEFITS

 

·         Excellent foam control

·         Good tramp oil rejection

·         Extended sump life

·         Very good corrosion control

 

RECOMMENDED STARTING DILUTIONS

 

CIMTECH 95 is to be mixed with water for use. Always add concentrate to water. Add no other materials to the concentrate or mix unless approved by your CIMCOOL® Technical Services Specialist.

 

Grinding	5% - 10% (1.2 to 2.4 on the refractometer scale)
Refractometer Factor	4.2
5% Mix pH, Typical Operating	9.0

 

CIMTECH 95 is available in PINK (B00190) and BLUE (B00191).

 

SAFETY DATA SHEET

 

Available at www.cimcool.com

 

For additional information refer to its OSHA SDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-888-CIMCOOL.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.