Ships in 5-7 Business Days
CIMTECH 285 synthetic metalworking fluid is recommended for machining and grinding of ferrous metals.
CIMTECH 285 can be used on cast Iron, nodular iron, carbon steels, and stainless steels. It should not be used on magnesium alloys or non-ferrous materials. It is designed for light to moderate duty machining applications such as milling, drilling, and turning. It can also be used in light to moderate duty grinding operations such as surface, double disc, center-type and internal grinding.
FEATURES & BENEFITS
· Low foaming even in turbulent grinding systems.
· Rejects tramp oil to keep product clean, which extends sump life.
· Excellent rust protection for the work-piece and machine tool.
· Offers good grinding ability, keeping wheels clean and allowing excellent chip evacuation.
RECOMMENDED STARTING DILUTIONS:
CIMTECH 285 is to be mixed with water for use. Always add concentrate to water. Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager.
Machining and Grinding
5% - 10% (1.28 to 2.56 on the refractometer scale)
5% Mix pH, Typical Operating
CIMTECH 285 is also in Blue, Product Code B00211
SAFETY DATA SHEET:
Available at www.cimcool.com
For additional information refer to its OSHA SDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-888-CIMCOOL.
Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.