CIMSTAR 3890

GENERAL INDUSTRY

 

DESCRIPTION

 

CIMSTAR 3890 is a chlorine free semi-synthetic metalworking.

 

APPLICATION

 

CIMSTAR 3890 was developed for use on non-ferrous materials. It can also be used on mild steels, stainless steels, hardened steels, ceramics and exotic metals. It should not be used on magnesium alloys.

 

FEATURES & BENEFITS

 

·         CIMSTAR 3890 is a heavy duty aluminum machining fluid

·         Exceptional lubricity for difficult cast aluminum machining

·         Can also be used in ferrous applications

·         Chlorine free

·         Has good rancidity control if properly controlled

 

RECOMMENDED STARTING DILUTIONS:

 

CIMSTAR 3890 is to be mixed with water for use. Always add concentrate to water. Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager.

 

Machining and Grinding	7% to 12% (4.7 – 8.0 on the refractometer scale)
Refractometer Factor	1.5
5% Mix pH, Typical Operating	8.5

 

SAFETY DATA SHEET:

 

Available at www.cimcool.com

 

For additional information refer to its OSHA SDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-888-CIMCOOL.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.