CENTER SAVER (5-gallon pail)

WATERPROOF GREASE

 

DESCRIPTION

 

CENTER SAVER® is a waterproof grease.

 

APPLICATIONS

 

CENTER SAVER® is designed as a lubricant for centers on lathes, grinders, hobbing machines, etc. Also lubricates and waterproofs bearings, pumps, and tools.

 

Use on ferrous and nonferrous metals such as Aluminum, Cast Iron, Carbon Steels, High Speed Steel, High Alloy Steels, Stainless Steels, Copper, Brass, Bronze. Not recommended for magnesium or magnesium alloys.

 

FEATURES & BENEFITS

 

REDUCES WEAR ON CENTERS:

 

The extreme pressure (EP) lubrication reduces the friction between the workpiece and the center. Prevents seizing of machine tool screws and fixtures.

 

LONG LASTING:

 

Won't run when it gets hot or is under pressure - metalworking fluids won't wash it off

 

UNIVERSAL APPLICATION:

 

Can be used on both ferrous and nonferrous metals

 

RECOMMENDED STARTING DILUTIONS

 

FOR INDUSTRIAL USE ONLY

 

Use without diluting (100%)

 

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

 

Physical State	Grease
Appearance and Odor	Opaque / Chemical
Solubility in water	Insoluble
Weight, lb/gal, 60°F (15.6 °C)	7.5
Viscosity (SUS) @ 100°F	> NA
Flash Point /Sp.Gr./Boiling Point	SEE MSDS
pH Concentrate	NA
pH Mix 100%, Typical Operating	NA
Total Chlorine/Chloride, wt%	8.7/<50ppm Total
Sulfur, wt%	0.1
Silicones	None

 

HANDLING and STORAGE

 

If frozen, thaw completely at room temperature. Inside storage is recommended.

 

SAFETY DATA SHEET

 

Available at www.cimcool.com

 

For additional information refer to its OSHA MSDS, website or contact your local CIMCOOL TECHNICAL SPECIALIST OR DISTRICT MANAGER, or you may contact CIMCOOL® Technical Services at 1-513-458-8199.

 

Limitation of Liability: Under no circumstances, shall we or any affiliate of ours have any liability whatsoever for loss of use, or for any indirect or consequential damages. Minor formulation changes or normal variations in the manufacture of this product may cause slight variances in the data presented on this sheet.