×

Garia 623 CS-52

Ships in 5-7 Business Days

SKU
410623520

High quality active sulfur cutting oils

 

DESCRIPTION

 

Houghton Garia Oils are light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe machining operations. Garia cutting oils are available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

 

Houghton Garia and the Houghton Garia chlorine free “M Series” are transparent, light colored, active sulfur cutting oils formulated using high quality refined base stocks with a naturally high viscosity index. The Garia product line varies in viscosity and extreme pressure level to cover the widest range of machining operations and conditions. Both the “CM Series” and “M-Series” of Houghton Garia cutting oils contain unique synergistic extreme pressure additive systems that readily react at the chip-tool interface to form extremely effective boundary lubricating films which reduce frictional heat and prevent metal-to-metal contact of the tool and workpiece. With the exceptions of Houghton Garia 422CM-36 and Houghton Garia 422M-36, all of the product family contain fatty oil additives which increase the lubricity and provides better surface finish of work-pieces. All of these cutting oils possess excellent anti-wear and anti-weld properties to maximize tool life and minimize machine downtime.

 

Houghton Garia 623CS-52 has the highest levels of EP of all the products in this series and can be used where most other cutting oils fail. Houghton Garia 623CS-52 can handle the most difficult operations and can machine the most difficult metals and alloys.

 

FEATURES/ BENEFITS

 

·         Light transparent color and low odor properties

·         Excellent lubricity and extreme pressure properties.

·         Chip-to-tool welding (built-up edge) minimization

·         Increased tool life

·         Closer tolerances

·         Better finish on parts

·         Corrosion/rust protection of part and machine

·         Low smoke/mist tendencies

·         Enhanced lubricity provides extended tool life and reduces tooling cost.

·         Provides improved part finish which reduces overall cost through reduced rework and scrap rates

·         Allows grinding wheels to run clean with less loading which saves money by extending time between wheel dressing and wheel changes.

 

DATA (TYPICAL VALUES)

               

 

Test Method

 

 

 

623CS-52

Product Code

 

61033

Appearance

 

Light pale

Odor

 

Mild

Color

D 1500

L1.5

Gravity, °API

D 1298

25.8

Viscosity:

@ 40°C, cSt

@ 100°C, cSt

@ 100°F, SUS

@ 210°F, SUS

 

D 445

D 445

D 88

D 88

 

52.2

7.81

268.4

55.5

Viscosity Index

D 2270

116

Flash Point, COC, °F

D 92

380

Pour Point, °F

D 97

10

Four Ball EP

Load Wear Index, kgf

Weld Point, kgf

D 2783

 

100

620

Sulfur

 

Present

Chlorine

 

Present

Phosphorus

 

Present

Fatty Oil

 

Present

 

APPLICATIONS

 

·         Deep hole drilling

·         Broaching and tapping

·         Gear cutting and shaving

·         Reaming

·         Grinding, honing and lapping

·         Turning, planning, shaping, drilling and milling

 

HEALTH AND SAFETY

 

Refer to MSDS for proper handling and disposal. Please note that the MSDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative.

 

NOTE: Read and understand all precautions on container labels before using this product.

 

This document contains information based on data that is believed to be correct. However, the product may not be applicable to all uses and operating environments. No warranty or guarantee is expressed or implied.

More Information
ManufacturerQuaker-Houghton