×

Garia 422 CM-36

Ships in 5-7 Business Days

SKU
410422360

High quality active sulfur cutting oils

 

DESCRIPTION

 

Houghton Garia Oils are light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe machining operations. Garia cutting oils are available in different EP levels and viscosity grades to cover a wide variety of machining operations and metals.

 

Houghton Garia and the Houghton Garia chlorine free “M Series” are transparent, light colored, active sulfur cutting oils formulated using high quality refined base stocks with a naturally high viscosity index. The Garia product line varies in viscosity and extreme pressure level to cover the widest range of machining operations and conditions. Both the “CM Series” and “M-Series” of Houghton Garia cutting oils contain unique synergistic extreme pressure additive systems that readily react at the chip-tool interface to form extremely effective boundary lubricating films which reduce frictional heat and prevent metal-to-metal contact of the tool and workpiece. With the exceptions of Houghton Garia 422CM-36 and Houghton Garia 422M-36, all of the product family contain fatty oil additives which increase the lubricity and provides better surface finish of work-pieces. All of these cutting oils possess excellent anti-wear and anti-weld properties to maximize tool life and minimize machine downtime.

 

Houghton Garia 422CM-36 can be used in a wide variety of operations where the machining requirements range from moderate to severe. Houghton Garia 422CM-36 contains no fatty oil and is, therefore, particularly useful in operations where surface finish is not critical.

 

Houghton Garia 422CM-36 is also recommended for use in some of the more severe grinding applications where products containing fat could lead to loading of the grinding wheel.

 

FEATURES/ BENEFITS

 

·         Light transparent color and low odor properties

·         Excellent lubricity and extreme pressure properties.

·         Chip-to-tool welding (built-up edge) minimization

·         Increased tool life

·         Closer tolerances

·         Better finish on parts

·         Corrosion/rust protection of part and machine

·         Low smoke/mist tendencies

·         Enhanced lubricity provides extended tool life and reduces tooling cost.

·         Provides improved part finish which reduces overall cost through reduced rework and scrap rates

·         Allows grinding wheels to run clean with less loading which saves money by extending time between wheel dressing and wheel changes.

 

DATA (TYPICAL VALUES)

               

 

Test Method

 

 

 

422CM-36

Product Code

 

61032

Appearance

 

Light pale

Odor

 

Mild

Color

D 1500

L1.0

Gravity, °API

D 1298

30.0

Viscosity:

@ 40°C, cSt

@ 100°C, cSt

@ 100°F, SUS

@ 210°F, SUS

 

D 445

D 445

D 88

D 88

 

35.4

6.09

181.7

44.4

Viscosity Index

D 2270

119

Flash Point, COC, °F

D 92

380

Pour Point, °F

D 97

10

Four Ball EP

Load Wear Index, kgf

Weld Point, kgf

D 2783

 

83

500

Sulfur

 

Present

Chlorine

 

Present

Phosphorus

 

None

Fatty Oil

 

None

 

APPLICATIONS

 

·         Deep hole drilling

·         Broaching and tapping

·         Gear cutting and shaving

·         Reaming

·         Grinding, honing and lapping

·         Turning, planning, shaping, drilling and milling

 

HEALTH AND SAFETY

 

Refer to MSDS for proper handling and disposal. Please note that the MSDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative.

 

NOTE: Read and understand all precautions on container labels before using this product.

 

This document contains information based on data that is believed to be correct. However, the product may not be applicable to all uses and operating environments. No warranty or guarantee is expressed or implied.

More Information
ManufacturerQuaker-Houghton