Neat Cutting Oils
DESCRIPTION
Garia 405 M-22 & M-32 are neat cutting oils for general machining on automatic lathes, gear hobbing and on thread – or tooth-flank grinding machines. Garia 405 M-22 & M-32 are particularly for working on middle to high resistance alloyed and low carbon steels and aluminum or magnesium alloys.
DATA (TYPICAL VALUES)
Garia 405 |
M-22 |
M-32 |
Appearance |
Yellow |
Yellow |
Kinematic viscosity @ 40 °C mm²/s (ASTM D 7042) |
22 |
32 |
Density @ 20° C kg/m3 (DIN EN ISO 12185) |
865 |
875 |
Flash point COC °C (DIN EN ISO 2592) |
190 |
200 |
Cu-Corrosion Test Alfa (ASTM D 130) |
4a |
4a |
FEATURES/ BENEFITS
Garia 405 M-22 & M-32 are based on hydro treated mineral oils with a low aromatic content.
Combinations of polar, extreme pressure and anti wear additives provide the oils with high load carrying properties. The oils provide good tool life and good surface finish of the machined work pieces. High efficient anti mist additives reduce the mist load in the air.
Due to the active sulphur in the Garia 405 M-22 & M-32 there is a risk of staining of yellow metals.
Garia 405 M-22 & M-32 are free of chlorine and heavy metals.
· Enhanced lubricity provides extended tool life and reduces tooling cost.
· Provides improved part finish which reduces overall cost through reduced rework and scrap rates
· Allows grinding wheels to run clean with less loading which saves money by extending time between wheel dressing and wheel changes.
HEALTH AND SAFETY
Refer to MSDS for proper handling and disposal. Please note that the MSDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative.
NOTE: Read and understand all precautions on container labels before using this product.
